Professional Pressure Washing in Aurora

Professional pressure washing in Aurora is safe for concrete and stone surfaces when calibrated correctly. Consumer pressure washers used at maximum pressure can etch concrete, dislodge polymeric sand from interlocking stone joints, and damage aged or spalled surfaces. Our professional equipment is fully adjustable, and our technicians set pressure levels appropriate to each surface condition.

Yes, with the right pressure calibration and nozzle selection. Wood surfaces require significantly lower pressure than concrete, typically 1,000 to 1,500 PSI compared to 2,500 to 3,000 PSI for concrete, and fan nozzles that spread the water stream rather than concentrating it. Holding the nozzle at the correct angle and distance prevents grain raising and surface scoring.

For most driveways in Aurora, pressure washing every one to two years is sufficient to remove accumulated organic growth, staining, and surface debris. Driveways with heavy vehicle traffic, significant tree coverage, or shaded sections that stay wet longer may benefit from annual cleaning. Scheduling pressure washing in Aurora at the right interval also prevents the buildup of organic material that accelerates concrete spalling and surface degradation over time.

For some surfaces and staining types, yes. These cleaning agents improve results and allow effective cleaning at lower pressure settings than would otherwise be required. All chemicals we use are appropriate for residential surfaces and safe for surrounding landscaping when applied and rinsed correctly.